Hardware technician တိအတြက္ အက်ိဳးဟိေရ software ေခ်ပါ။ freeware အမ်ိဳးအစားပါ။ portable အမ်ိဳးအစားလဲ ျဖိဳက္ပါေရ။
Configuration file
CPU-Z uses a configuration file, cpuz.ini, that allows to set several parameters for the program. The cpuz.ini file must be in the same directory as cpuz.exe. It looks like this :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=1
MaxPCIBus=256
DMI=1
Sensor=1
SMBus=1
Display=1
ShowDutyCycles=0
TextFontName | Font used for the information boxes. |
TextFontSize | Size of the font used for the information boxes. |
TextFontColor | Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB |
LabelFontName | Font used for the label boxes. |
LabelFontSize | Size of the font used for the label boxes. |
Sensor | Set to OFF (or 0) disables sensor chip detection and voltages measurement. |
DMI | Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. |
PCI | Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. |
MaxPCIBus | Sets the maximum PCI bus to scan. Default value is 256. |
SMBus | Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. |
Display | Set to OFF (or 0) disables the video card information reported in the validator. |
ShowDutyCycles | Set to 1, switches the alternate clock computation method based on duty cycles. 0 to disable. |
